|He's not too sure about this bath thing...|
Here's how you can make one too.
1 large towel
Heavy duty needle (optional, but makes the job easier)
Fabric scissors or rotary cutter
1. Fold your towel lengthwise or "hot dog" style. Cut a 12 to 14-inch piece from one end.
2. Turn under the raw edge of the big piece and pin in place. With a straight stitch sew across. Go back along this seam with a zig zag to prevent the towel from unravelling. Since my towel had stripes I didn't pin. I just made sure the stripes lined up.
3. Take the big piece and line up one corner on top of the 12-inch piece with the finished edge of the small piece on the bottom. The finished edge is going to be the edge of the hood. You're going to cut a triangle form the little piece so you want to make sure it's the right shape of triangle. I eyeballed how big to make the triangle. I just imagined it as the hood and how big my baby's head is.
4. Cut out the two edges of the triangle and pin it to the corner of the big piece. Save the scraps.
5. Sew along the two edges with a straight stitch.
6. Turn the triangle inside out and there's your hooded towel!
For the mitt:
1. Place your hand on the scrap of towel to figure out how tall you want your mitt. Fold your scrap in half and cut out a rectangle with one side being on the fold.
2. Unfold your rectangle and turn under one of the long edges and sew down.
3. Fold the rectangle in half with the turned under edge on the outside (right sides together) and sew the raw edges.
4. Turn right side out and there's your mitt!